CONFIGURE YOUR TELEPHONE TERMINAL FOR TELEWORKING

Sms marketing that most import to get phone number list
Post Reply
aliciarabin4
Posts: 1
Joined: Thu Oct 27, 2022 11:26 am

CONFIGURE YOUR TELEPHONE TERMINAL FOR TELEWORKING

Post by aliciarabin4 »

Due to the health crisis situation we are going through because of the Coronavirus (COVID-19), there are many companies that have a virtual switchboard and are considering that their employees perform telework. To do this, you have to correctly configure the IP of the telephone terminal of each of your employees so that they can take the telephone terminal to their respective homes and connect it to the Internet. Although it seems something very complicated to do, in reality, you only have to perform a few simple steps that we will explain below. With this, we will change the IPv4 of the terminal from static mode (or fixed) to dynamic mode. In case you already have configured the IP of the phone in dynamic mode, you will not have to do anything, just take it home and connect it to the Internet.

The employee can now telework. These steps are valid for customers as well as for any company that has an IP telephone system. In our case, we are going to explain it with Yealink Phone Number List terminals, because they are the ones we normally work with. Specifically, with the SIP-T21 P E2 and the SIP-T27 G. You may be interested in knowing the functions, codes and how to perform a blind transfer and/or an accepted transfer with these telephone terminals. In addition, companies that have a PBX have the option of using Softphone. What is it, what does it consist of, which one is the most recommended…? Now we will see. WHAT DO I HAVE TO DO TO CONFIGURE THE IP OF MY TELEPHONE TERMINAL? To configure the IP of your terminal, you must follow the steps listed below.

Image

From our main screen, we press the MENU button. menu 2. Using the directional buttons, we search for SETTINGS and press the ENTER button. settings 3. Using the directional buttons, search for ADVANCED SETTINGS, and press the ENTER button. configuration-advanced 4. We enter the password provided by our operator as it was given to us, respecting upper and lower case, and press the ACCEPT button. password 5. Using the directional buttons, we search for NETWORK, and press the ENTER button. red 6. Using the directional buttons, we search for WAN PORT, and press the ENTER button. port-WAN 7. We will get this screen. IPv4-1 8. We press the directional buttons, search for IPv4, and press the ENTER button. select-IP
Post Reply